Free Shipping
35 Years of Business

New Port Engineering 12 Volt Wiper Motors for Chevy Passenger Cars & Corvettes

The clean wipe wiper drive is a true bolt-in replacement for your original equipment vacuum or electric windshield wiper motor.  Each model of the clean wipe wiper drive is designed for the specific year and model of the vehicle.

Features:

  • Wiper drives attach to the stock mounting brackets
  • Designed for attachment to O.E.M. wiper transmission or cable drums
  • Our kits are 12 volt.  If your vehicle is 6 volt, you will need a power inverter or to convert your vehicle to 12 volt
  • Each kit comes complete with nylon bushings to replace the rubber grommets in the wiper transmission linkage arms (when required)
  • Clears stock cowl vent and air conditioning
  • Three year guarantee

 

1935-1936 Chevy Passenger Cars (1935 Master Only) (NE3536CP):

Motor mounts in the stock location under the dash using the stock linkage and transmissions.  The two speed switch provided will mount in the stock location, but the delay switch will not.  *This motor will not fit with the stock radio box.*  This motor works for all 1936 Chevy passenger cars, but only 1935 Master (not standard).

 

1937-1938 Chevy Passenger Cars (NE3738CP):

Motor mounts in the stock location under the dash using the stock linkage and transmissions.  The two speed switch provided will mount in the stock location, but the delay switch will not.  *This motor will not fit with the stock radio box.*

 

1939 Chevy Passenger Cars (NE3900CP):

Motor mounts in the stock location under the dash using the stock linkage and transmissions.  The two speed switch provided will mount in the stock location, but the delay switch will not.  *This motor will not fit with the stock radio box.*

 

1940 Chevy Passenger Cars (NE4000CP):

Motor mounts in the stock location under the dash using the stock linkage and transmissions.  The two speed switch provided will mount in the stock location, but the delay switch will not.  *This motor will not fit with the stock radio box.*

 

1941 Chevy Passenger Cars (NE4100CP):

Motor mounts in the stock location under the dash using the stock linkage and transmissions.  The two speed switch provided will mount in the stock location, but the delay switch will not.  *This motor will not fit with the stock radio box.*

 

1942-1948 Chevy Passenger Cars (NE4800CP):

Motor mounts in the stock location under the dash using the stock linkage and transmissions.  The two speed switch provided will mount in the stock location, but the delay switch will not.  *This motor will not fit with the stock radio box.*

 

1949-1952 Chevy Passenger Cars (NE4952CP):

Motor mounts in the stock location under the dash using the stock linkage and transmissions.  The two speed switch provided will mount in the stock location, but the delay switch will not.

 

1953-1954 & 1957 Chevy Passenger Cars (NE5354/57CP):

Motor mounts in the stock location on the firewall in the engine compartment and operates through the OEM cables.  For 1953-1954 cars, the two speed switch provided will mount in the stock location, but the delay switch will not.  For the 1957 cars, a shaft extension is required for the two speed switch or the delay switch to mount in the stock location and to use the stock wiper knob.

 

1955-1956 Chevy Passenger Cars (NE5556CP):

Motor mounts in the stock location on the firewall in the engine compartment and operates through the OEM cables.  A shaft extension is required for the two speed switch or delay switch to mount in the stock location and to use the original wiper knob.

 

1958 Chevy Passenger Cars (Except Corvette) (NE5800CP):

Motor mounts in the stock location under the dash using linkage and requires stock vacuum wiper transmissions.  The original wiper transmissions used with the factory electric wiper will not work with the New Port Engineering electric motor.

 

1958-1962 Chevy Corvette Only (NE5862VT):

Motor mounts in the stock location on the firewall in the engine compartment and operates through the OEM cables.  This application requires the use of our shaft extension if you intend to mount the switch in the stock location and use the stock wiper knob and bezel.

 

1959 & Early 1960 Chevy Passenger Cars (Except Corvette) (NE5900CP):

It's here!  Finally a true bolt-in replacement for your 1959 & 1960 Chevy cars.  The clean wipe wiper drive for the 1959-1960 Chevy is a high tech motor replacement for the OEM electric motor.  We use an extremely heavy duty factory tested two speed motor that is smaller than the original, giving you more room for that big block or aftermarket ignition system.  The kit mounts in the factory mounting position, hooks up to the original linkage and transmissions, and comes with all the mounting hardware.  It can also be easily upgraded to full intermittent delay wipers.  Don't trust a rebuilt motor.  Upgrade your car with a New Port wiper drive.  *Please see the picture to verify that your original drive mechanism looks similar to the one pictured.For the 1960 Chevy, there is an early and late model wiper.  Please see the pictures and verify that your original drive mechanism looks similar to the one shown.  If not, you may have an early 1960 which is similar to the 1959.  Please view both pictures before ordering.*  This application requires the use of a shaft extension to mount the provided two speed switch or delay switch in the stock location and to use the stock wiper knob & bezel.

 

Late 1960 Chevy Passenger Cars (Except Corvette) (NE6000CP):

It's here!  Finally a true bolt-in replacement for your 1960 Chevy cars.  The clean wipe wiper drive for the 1960 Chevy is a high tech motor replacement for the OEM electric motor.  We use an extremely heavy duty factory tested two speed motor that is smaller than the original, giving you more room for that big block or aftermarket ignition system.  The kit mounts in the factory mounting position, hooks up to the original linkage and transmissions, and comes with all the mounting hardware.  It can also be easily upgraded to full intermittent delay wipers.  Don't trust a rebuilt motor.  Upgrade your car with a New Port wiper drive.  *For the 1960 Chevy, there is an early and late model wiper.  Please see the pictures and verify that your original drive mechanism looks similar to the one shown.  If not, you may have an early 1960 which is similar to the 1959.  Please view both pictures before ordering.*  This application requires the use of a shaft extension to mount the provided two speed switch or delay switch in the stock location and to use the stock wiper knob & bezel.

 

1961-1962 Chevy Passenger Cars (Except Corvette & Nova):

It's here!  Finally a true bolt-in replacement for your 1961-1962 Chevy cars.  The clean wipe wiper drive for the 1961-1962 Chevy is a high tech motor replacement for the OEM electric motor.  We use an extremely heavy duty factory tested two speed motor that is smaller than the original, giving you more room for that big block or aftermarket ignition system.  The kit mounts in the factory mounting position, hooks up to the original linkage and transmissions, and comes with all the mounting hardware.  It can also be easily upgraded to full intermittent delay wipers.  Don't trust a rebuilt motor.  Upgrade your car with a New Port wiper drive.  This application requires the use of a shaft extension to mount the provided two speed switch or delay switch in the stock location and to use the stock wiper knob & bezel.

 

1963-1964 Chevy Passenger Car (Impala, Bel Air, Biscayne) (NE6364CP):

It's here!  Finally a true bolt-in replacement for your 1963-1964 Chevy Impala, Bel Air, & Biscayne.  The clean wipe wiper drive for the '63-'64 Chevy is a high tech motor replacement for the OEM electric motor.  We use an extremely heavy duty factory tested two speed motor that is smaller than the original, giving you more room for a power brake booster or almost any aftermarket part.  The kit mounts in the factory mounting position, hooks up to the original linkage and transmissions, and comes with a two speed rotary switch and all the mounting hardware.  It can easily be upgraded to full intermittent delay wipers with the addition of our intermittent delay switch.  Don't trust a rebuilt motor.  Upgrade your car with a New Port wiper drive.  *This unit is pictured with the mounting bracket painted the color of the car.  The motor will come with a black powder coated bracket.*  This application requires the use of our shaft extension if you intend to mount the switch in the stock location and use the stock knob and bezel.

 

1965-1969 Chevy Impala and Full Size Cars (NE6569CP):

Now available from New Port Engineering is a newly developed wiper drive kit for your 1965-1969 Chevy passenger car.  The New Port Engineering clean wipe wiper drive is a direct bolt-in motor replacement for the original one speed or two speed motor and hooks up to the stock wiper transmissions.  Our kit features an extra-heavy duty electric motor, wiper drive arm, mounting bracket and hardware, wiring harness, and two speed switch.  This kit is a must have if you are having any clearance issues with the original wiper motor.  Our motor is much smaller than the original and is angled to provide optimal clearance.  The kit is easily upgraded to full delay wipers like your late model car with the addition of our intermittent delay switch.  Other options include a switch shaft extension to allow the switch to use the stock knob and bezel and fit in the stock location.  There is also a remote mount washer pump kit available.  This application requires the use of our shaft extension if you intend to mount the switch in the stock location and use the stock knob and bezel.

 

*Please select the year of your car when ordering along with the options you want to add on.*

Write a review

Please login or register to review

New Port Engineering 12 Volt Windshield Wiper Motor for Chevy Passenger Cars & Corvettes

  • Brands Newport Wipers
  • Product Code: New Port Engineering
  • Availability: In Stock
  • $229.95


Available Options